收藏本站
LinkMatik 1.0
General Setup
Insert the LinkMatik in the evaluation board so that
the antenna overhangs the edge of the board.
There should be nothing inserted in the Toothpick,
Slave Mode
To evaluate LinkMatik in slave mode, put the SW7
switch in the Sleep position, remove any existing
links and then connect the links as follows:
Stamp and BlueMatik sockets. Remove any
existing links and then insert links over the
following configuration pins:
A3 –
A8 –
A10–
A4
A9
B10
(RS232 TxD to RxD pin)
(RS232 CTS to RTS pin)
(RS232 CTS to RTS pin)
A3 –
A8 –
A10–
B2 –
B5 –
B8 –
A4
A9
B10
B3
B6
B9
(RS232 TxD to RxD pin)
(RS232 CTS to RTS pin)*
(RS232 CTS to RTS pin)*
(RS232 RTS to CTS pin)
(RS232 RxD to TxD pin)
(RS232 RTS to CTS pin)
B2 –
B5 –
B8 –
E7 –
E4 –
E9 –
B3
B6
B9
E8
E5
F9
(RS232 RTS to CTS pin)
(RS232 RxD to TxD pin)
(RS232 RTS to CTS pin)
(SW6 to MSM input)
(RS232 TxD to RxD pin)
(RS232 RxD to TxD pin)
*Note: on one version of the board (TPDr5 ), the
“ A8 – A9 ” and “ B8 – B9 ” is omitted on the rear-
side labels.
You can decide whether the MSM input is
controlled by switch SW6 or via the DTR line on
the RS232 port. To control it from the switch SW6,
insert a link over the following configuration pin:
LinkMatik is now configured so that the MSM input
is controlled by SW6 and the Connect / Sleep line
is controlled by SW7.
Apply power and put SW6 into the Slv position.
Then put SW7 into the On position. The Status
LED should flash to indicate that it has entered
Slave mode and is waiting for a device to connect
to it.
E7 – E8
(SW6 to MSM input)
To see the LinkMatik working, two HyperTerminal
To control the HUM input from DTR line, insert
links over the following configuration pins:
sessions much be started on a PC. One will be
connected via the RS232 port, the other via
Bluetooth. What you type into one console will
A6 – A7
E7 – F7
(DTR to MSM input)
(DTR to MSM input)
appear in the other.
First connect the DB9 socket to your PC’s serial
To operate in normal transceiver mode, insert links
over the following configuration pins:
port. Start a HyperTerminal session at 9600 baud,
hardware flow control, 8 bits no parity, one stop bit.
E4 – E5
E9 – F9
(RS232 RxD to TxD pin)
(RS232 TxD to RxD pin)
Second, use the Bluetooth Manager on your PC to
discover LinkMatik. You will need to pair with it,
since security is enabled. The PIN code is four
To operate in configuration mode, insert links over
the following configuration pins:
zeroes ‘0000’. Connect to LinkMatik and observe
that the Status LED glows steadily as the
connection is complete.
E4 – F4
F8 – F9
(4k7 pull-down to TxD pin)
(4k7 pull-down to RxD pin)
Start another HyperTerminal session, using the
COM port number assigned by the Bluetooth
Manager when you made the connection. The
baud settings are ignored, so enter anything you
like for them.
You should now find that anything you type in one
HyperTerminal window appears in the other
HyperTerminal window.
Page 7
30-Jan-07
Bluetooth Eval Board DS378-3
? FlexiPanel Ltd
Patents apply and/or pending
www.FlexiPanel.com
发布紧急采购，3分钟左右您将得到回复。

采购需求

(若只采购一条型号，填写一行即可)

发布成功！您可以继续发布采购。也可以进入我的后台，查看报价

发布成功！您可以继续发布采购。也可以进入我的后台，查看报价

*型号 *数量 厂商 批号 封装
添加更多采购

我的联系方式

*
*
*
相关PDF资料
EVB71101B-433-FSK-C EVALUATION BOARD TH71101 RECEIVR
EVB71102B-315-FSK-C EVALUATION BOARD TH71102 RECEIVR
EVB71111B-915-FSK-C EVALUATION BOARD TH71111 RECEIVR
EVB71112B-915-FSK-C EVALUATION BOARD TH71112 RECEIVR
EVB7122-433-FSK-C BOARD EVAL FOR TH7122 433MHZ
EVB90121 BOARD EVAL FOR MLX90121
EWG803 LAMP INCAND T1.5 GLASS WEDGE 28V
EY3A-3051-A SENSOR 3BEAMS 50MM (AMP)
相关代理商/技术参数
EVAL-CED1Z 功能描述:BOARD EVAL CONVERTER RoHS:是 类别:编程器，开发系统 >> 配件 系列:- 产品培训模块:Lead (SnPb) Finish for COTS Obsolescence Mitigation Program RoHS指令信息:IButton RoHS Compliance Plan 标准包装:1 系列:- 附件类型:USB 至 1-Wire? RJ11 适配器 适用于相关产品:1-Wire? 设备 产品目录页面:1429 (CN2011-ZH PDF)
EVAL-CED1Z 制造商:Analog Devices 功能描述:EVALUATION BOARD ((NS))
EVAL-CED1Z3 制造商:AD 制造商全称:Analog Devices 功能描述:18-Bit, 2.5 LSB INL, 800 kSPS SAR ADC
EVAL-CFTL-6V-PWRZ 功能描述:EVAL DC POWER SUPPLY RoHS:是 类别:编程器，开发系统 >> 评估板 - DC/DC 与 AC/DC（离线）SMPS 系列:- 标准包装:1 系列:- 主要目的:DC/DC，步降 输出及类型:1，非隔离 功率 - 输出:- 输出电压:3.3V 电流 - 输出:3A 输入电压:4.5 V ~ 28 V 稳压器拓扑结构:降压 频率 - 开关:250kHz 板类型:完全填充 已供物品:板 已用 IC / 零件:L7981 其它名称:497-12113STEVAL-ISA094V1-ND
EVAL-CFTL-LVDT 功能描述:界面开发工具 RoHS:否 制造商:Bourns 产品:Evaluation Boards 类型:RS-485 工具用于评估:ADM3485E 接口类型:RS-485 工作电源电压:3.3 V
EVAL-CN0150A-SDPZ 功能描述:EVAL CIRCUIT BOARD RoHS:是 类别:RF/IF 和 RFID >> RF 评估和开发套件，板 系列:- 标准包装:1 系列:- 类型:GPS 接收器 频率:1575MHz 适用于相关产品:- 已供物品:模块 其它名称:SER3796
EVAL-CN0158-EB1Z 功能描述:EVAL CIRCUIT BOARD RoHS:是 类别:编程器，开发系统 >> 评估演示板和套件 系列:- 标准包装:1 系列:- 主要目的:数字电位器 嵌入式:- 已用 IC / 零件:AD5258 主要属性:- 次要属性:- 已供物品:板 相关产品:AD5258BRMZ1-ND - IC POT DGTL I2C1K 64P 10MSOPAD5258BRMZ10-ND - IC POT DGTL I2C 10K 64P 10MSOPAD5258BRMZ100-ND - IC POT DGTL I2C 100K 64P 10MSOPAD5258BRMZ50-ND - IC POT DGTL I2C 50K 64P 10MSOPAD5258BRMZ1-R7-ND - IC POT DGTL I2C 1K 64P 10MSOPAD5258BRMZ10-R7-ND - IC POT DGTL I2C 10K 64P 10MSOPAD5258BRMZ50-R7-ND - IC POT DGTL I2C 50K 64P 10MSOPAD5258BRMZ100-R7-ND - IC POT DGTL I2C 100K 64P 10MSOP
EVAL-CN0159-EB1Z 功能描述:EVAL CIRCUIT BOARD USB RoHS:是 类别:编程器，开发系统 >> 评估演示板和套件 系列:- 标准包装:1 系列:- 主要目的:电信，线路接口单元（LIU） 嵌入式:- 已用 IC / 零件:IDT82V2081 主要属性:T1/J1/E1 LIU 次要属性:- 已供物品:板，电源，线缆，CD 其它名称:82EBV2081